JHS Volture 9V Voltage Control Guitar Pedal

The Volture is a modern-day device for your vintage fuzz circuitry. Simply place it in between your power supply and your pedal, and you can precisely trim the input voltage and perfectly replicate the tone of a dying battery. As the song says, “Power is made by power being taken.” 

Though we developed it specifically for vintage fuzz circuits, the Volture will work on any fully analogue pedal. In fact, you might be surprised by the trippy sounds you find lurking in your favourite overdrive or distortion.

With the Volture, you can input 9, 12 or 18VDC and output an adjustable voltage from 7.5VDC down to 1.25VDC, creating gated, distorted, possibly glitchy but always sputtery fuzz sounds. Input voltage is 9VDC to 18VDC, centre negative. The output voltage is 1.25VDC to 7.5VDC, centre negative. The Volture uses 10mA in addition to the power when it is active. The Volture should be used with pedals less than 50mA.

Features:

• The knob adjusts the voltage level. Clockwise is more, and counterclockwise is less. 
• As you turn the voltage down, the LED will dim. 
• The Volture should not be paired with any digital/logic circuitry-based pedal, otherwise, the user risks potential damage to the pedal being powered due to inadequate voltage 
• Once you go below 2V, the LED will turn off. This lets you know that your pedal probably no longer has enough juice to function.